Skip to content

VCDS-Expert.com

VCDS Coding and tweaks

  • Home
  • Downloads

Volkswagen Golf MK6 – Needle Flick

June 18, 2016 Admin

This simple VCDS coding will make the dashboard needle (speedo) do a flick between sides when you initially turn the ignition on – pretty cool eh! This only works if you have the H type cluster Note: When you have… Read moreVolkswagen Golf MK6 – Needle Flick

Volkswagen  Leave a comment

Audi A3 8P VCDS coding List

June 18, 2016 Admin

1) Central Electronics (09) Long Coding Helper Byte 0 Bit 3 – Daytime Running Lights (Scandinavia) active – (DRLs plus tailights) Bit 4 – Daytime Running Lights (North America) active – (DRLs only) Bit 5 – Assistance Driving Light _Leaving Home active… Read moreAudi A3 8P VCDS coding List

Audi  Leave a comment

Audi A4|S4|A5|S5|B8 VCDS Coding List

April 1, 2016April 1, 2016 Admin

1. Enable Hidden menu in MMI 3G [5F – Information Electr.] [Adaptation – 10] -> Channel 6 change 0 to 1 Note: To access the hidden menu, hold down car and setup together for 5 seconds 2. Enable Hidden menu… Read moreAudi A4|S4|A5|S5|B8 VCDS Coding List

Audi, Tips  Leave a comment

Audi A1 VCDS Coding List

June 7, 2015June 12, 2015 Admin

1. DRL 100% And Rear LEDs Device 09-central electronics> coding> byte 11, bit 2 The green indicator light on the light switch stays lit all the time when the DRL is. Also the map display in navigation mode is dimmed… Read moreAudi A1 VCDS Coding List

Audi, Uncategorized  Leave a comment

Audi MP3 Cd Changer

May 26, 2015 Admin

Not many people realise but the later type CD changers for the Audi A6/A8/Q7 and some A4 can play MP3 disks, the simple way to find out would be to put a MP3 formatted disk in and see if the… Read moreAudi MP3 Cd Changer

Audi, Tips  Leave a comment

Audi MMI 2G Instrument Cluster menu enable

May 26, 2015May 26, 2015 Admin

Again this is usually removed by mistake during a software upgrade and can be easily turned back on by two methods From the hidden service menu Press and hold the [SETUP] and [CAR] buttons simultaneously for about four seconds Scroll down… Read moreAudi MMI 2G Instrument Cluster menu enable

Audi, Audi MMI 2g  Leave a comment

Audi MMi 2G Battery Menu Enable

May 26, 2015May 26, 2015 Admin

This is usually removed by mistake during a software upgrade and can be easily turned back on by two methods From the hidden service menu Press and hold the [SETUP] and [CAR] buttons simultaneously for about four seconds Scroll down to… Read moreAudi MMi 2G Battery Menu Enable

Audi, Audi MMI 2g  Leave a comment

Audi A6 C7 VCDS Coding List

May 26, 2015 Admin

1. Enabling Gauge Test/Needle Sweep [Select] [17 – Instruments] [Coding – 07] [Long Coding Helper] Click on the second byte in the list. Check the box for “Gauge Test/Needle Sweep active” [Do It!] 2. Hidden menu in 3G MMI [Select]… Read moreAudi A6 C7 VCDS Coding List

Audi, Uncategorized  Leave a comment

Audi A6 C6 VCDS Coding List

May 5, 2015May 5, 2015 Admin

Here is a list of changes and options that are confirmed working on the C6 shape Audi A6 (2004-2008) 1. Confirmation on Lock [Select] [46 – Central Conv] [Coding – 07] +2048 to your existing coding (example – original code… Read moreAudi A6 C6 VCDS Coding List

Audi  Leave a comment

Posts navigation

Newer posts

Categories

  • Audi
  • Audi MMI 2g
  • RNS-E
  • Tips
  • Uncategorized
  • VCDS Coding
  • Volkswagen

Recent Posts

  • Audi Component Protection
  • Audi A5 Convertible – SmartTop Roof Module
  • 2010 Audi A5 Cabriolet / S5 Cabriolet – Manuals
  • Audi Drive Select – VCDS Programming Guide
  • VCDS 03175 – Invalid Data Set
© 2021 All rights reserved
Go to top